background image

34

www.racing-cars.com

TM

SPARES LISTS

www.racing-cars.com

For the latest spares and option parts visit.....

Hardware Cont.

U7707  M3 Washers (pk10)

U7709  M3 Black Alloy Washers 0.75mm (pk10)

U8309  M3x6 Stainless Steel Cap Head (pk10)

Option Parts

U230 

92T Whisper Gear - 48 D.P.

U231 

89T Whisper Gear - 48 D.P.

U232 

86T Whisper Gear - 48 D.P.

U1894  83T Whisper Gear - 48 D.P.

U3850  Wing Mount Set - Off Road

U7154  Gear; 89T Spur - Slipper

U7236  Pro Transmission Upgrade - CAT XLS

U7237  Pro front Diff Pulley & Fences - CAT XLS

U7238  Pro Rear Diff Diff Pulley & Fences - CAT XLS

U7239  Pro Layshaft - CAT XLS

U7240  Pro Diff Rebuild Kit - XLS,TC

U7241  Pro Front Belt - CAT XLS

U7242  Pro Rear Belt (pr) - CAT XLS

U7243  Alloy Washer Carriers (pr) - CAT XLS

U7244  Pro Transmission O-Rings - CAT XLS

U7245  Alloy Eccentric (pr) - CAT XLS

U7264  C/F Topdeck - CAT XLS

U7267  C/F Lipo Straps - CAT XLS

U7268  C/F Servo Spacer and C.T.R - CAT XLS

U7292  Alloy Rear Trans Housing Inner - CAT XLS

U7293  Alloy Front Transmission Housings - Procat/XLS

U7294  Alloy Rear Trans Spacer - CAT XLS

U7313  Titanium Turnbuckle - 24mm - Silver - pr

U7314  Titanium Turnbuckle - 30mm - Silver - pr

U7315  Titanium Turnbuckle - 35mm - Silver - pr

U7318  Titanium Turnbuckle - 53mm - Silver - pr

U8289  C/F Chassis - Procat

U8290  C/F Rear Link Mount - Procat

U8300  C/F Rear Shock Mount - Procat

U8301  Rear Roll Bar Conversion - Procat

U8328  Vintage Springs Short Set (7pr)

U8329  Vintage Springs Med Grey 2.7lb/in (pr)

U8330  Vintage Springs Med Blue 3.0lb/in (pr)

U8331  Vintage Springs Med Black 3.3lb/in (pr)

U8332  Vintage Springs Med Set (6pr)

U8362  Vintage Springs Med Green 3.6lb/in (pr)

U8363  Vintage Springs Med Orange 4.4lb/in (pr)

U8364  Vintage Springs Short Green 5.2lb/in (pr)

U8365  Vintage Springs Short Purple 6.9lb/in (pr)

U8366  Vintage Springs Short Orange 8.0lb/in (pr)

U8367  Vintage Springs Short Grey 3.5lb/in (pr)

U8368  Vintage Springs Short Blue 4.0lb/in (pr)

U8369  Vintage Springs Short Black 4.5lb/in (pr)

Pinions

U2305  16T Steel Pinion - 48 D.P.

U2306  17T Steel Pinion - 48 D.P.

U2307  18T Steel Pinion - 48 D.P.

U2308  19T Steel Pinion - 48 D.P.

U2309  20T Steel Pinion - 48 D.P.

U2310  21T Steel Pinion - 48 D.P.

U2311  22T Steel Pinion - 48 D.P.

U2312  23T Steel Pinion - 48 D.P.

U2313  24T Steel Pinion - 48 D.P.

U2314  25T Steel Pinion - 48 D.P.

U2315  26T Steel Pinion - 48 D.P.

U2316  27T Steel Pinion - 48 D.P.

U2317  28T Steel Pinion - 48 D.P.

U2318  29T Steel Pinion - 48 D.P.

U2319  30T Steel Pinion - 48 D.P.

Wheels

U7597  Front Wheels  White (pr) - TOP CAT

U7598  Rear Wheels  White (pr) - TOP CAT

CR680  JC 5 Spoke 2.2 Front White Wheel XLS - pr

CR681  JC 5 Spoke 2.2 Rear White Wheel XLS  pr

CR682     JC Dish 2.2 Front White Wheel XLS  pr

CR683  JC Dish 2.2 Rear White Wheel XLS  pr

CR684  JC Spoke 2.2 Front Wheel - TOP CAT - pr

Summary of Contents for ProCat Classic







































Reviews: