•
11
•
MAINTENANCE INSTRUCTIONS
12.
After use and before performing maintenance, unplug and disconnect the Instant
12.1
Power™ (see sections 3 and 4).
Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery clips,
12.2
cords, and the Instant Power™ case.
Ensure that all of the Instant Power™ components are in place and in good working
12.3
condition, for example, the plastic boots on the battery clips.
Servicing does not require opening the unit, as there are no user-serviceable parts.
12.4
All other servicing should be performed by qualified service personal.
12.5
MOVING AND STORAGE INSTRUCTIONS
13.
Store the Instant Power™ in an upright position.
13.1
Store inside, in a cool, dry place.
13.2
Do not store the clips on the handle, clipped together, on or around metal, or clipped
13.3
to cables. The clips on the Instant Power™ are live and will produce arcing or sparking
if they come in contact with each other. To prevent accidental arcing, always keep the
clips on the storage holders when not using it to jump start a vehicle.
If the Instant Power™ is moved around the shop or transported to another location, take
13.4
care to avoid/prevent damage to the cords, clips and Instant Power™. Failure to do so
could result in personal injury or property damage.
Do not use and/or store the Instant Power™ in or on any area or
surface where damage could occur if the internal battery should unexpectedly leak acid.
IMPORTANT:
13.5
CHARGE IMMEDIATELY AFTER PURCHASE
•
KEEP FULLY CHARGED
•
Charge the Instant Power™ internal battery immediately after purchase, after every
use and every 30 days.
All batteries are affected by temperature. The ideal storage temperature is at 70 degrees
Fahrenheit. The internal battery will gradually self-discharge (lose power) over time,
especially in warm environments. Leaving the battery in a discharged state may result
in permanent battery damage. To ensure satisfactory performance and avoid permanent
damage, charge the internal battery every month.
TROUBLESHOOTING
14.
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
The Instant Power™ won’t
jump start my car.
Jump Start/USB Switch is not
turned ON.
Clips are not making a good
connection to the battery.
The Instant Power™ battery is
not charged.
The vehicle’s battery is
defective.
Turn ON the Jump Start/USB
Switch.
Check for poor connection to
battery and frame. Make sure
connection points are clean.
Rock clips back and forth for a
better connection.
Check the battery charge status
by pressing the button on the
front of the Instant Power™.
See DIgITAL DISPLAY
FUNCTIONS section of this
manual.
have the battery checked.
