•
13
•
PROBLEM
POSSIBLE CAUSE
SOLUTION
Green LED is flashing
and the display shows
CHARGE ABORTED-
BAD BATTERY.
The battery is sulfated.
The battery is too large for the
charger.
The battery voltage is still below
10V after 2 hours of charging.
Reset the charger by briefly
unplugging it.
You need a charger with a higher
amp rate.
Have the battery checked.
The display shows
CONNECT CLAMPS.
The clamps are not making a good
connection.
The fuse is bad.
Check for poor connection at
battery and frame.
Replace the in-line fuse for the
ring connector.
16. SPECIFICATIONS
Input Voltage ..................................................................120V AC @ 60Hz, 1.5A
Output Voltage ........................................................................................12V DC
Output Current Rating .........................................................................6A @ 12V
17. REPLACEMENT PARTS
Battery clamps (quick-connect) .....................................................3899003431Z
12V accessory plug (quick-connect) .............................................3899003432Z
Ring connectors (quick-connect) ..................................................3899003433Z
18. BEFORE RETURNING FOR REPAIRS
For information about troubleshooting,
contact customer service for assistance:
www.batterychargers.com
or call 1-800-621-5485, Monday-Friday 7:00
am
to 5:00
pm
CST
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485. DO
NOT SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION
(RMA) number from Customer Service at Schumacher Electric Corporation.
