• 12 •
Smart Cable LED and Alarm Behavior
BEHAVIOR
REASON
Green LED flashing
Ready to connect the smart cable to
the jump starter, and ready to connect
the clamps to the vehicle.
Green LED solid
(with clicking sound)
Detecting the condition of the vehicle
and jump starter.
Green LED solid
Ready to jump start the vehicle. After
jump start, disconnect the clamps.
Red LED lit (no alarm)
Voltage is too high or too low for
starting a vehicle.
Red LED lit; long buzzer alarm
The connection is reversed.
Short circuit protection.
Overload protection.
NOTE: Disconnect and reconnect the smart cable to reset.
12. BEFORE RETURNING FOR REPAIRS (U.S./CANADA)
For information about troubleshooting,
contact customer service for assistance:
www.batterychargers.com or call 1-800-621-5485
For REPAIR OR RETURN, contact Customer Service at
1-800-621-5485. DO NOT SHIP UNIT until you receive a
RETURN MERCHANDISE AUTHORIZATION (RMA) number
from Customer Service at Schumacher Electric Corporation.
When returning an item, place the original package into a shipping
carton. If you received an emailed label from Schumacher, please
print the label and tape it to the carton. Only ship via insured
ground service with a tracking number. Return shipping
charges are the responsibility of the customer. We cannot accept
C.O.D. deliveries and are not responsible for lost or damaged
packages. Please do not place stickers or shipping labels on the
original manufacturer’s package. Please allow 2-3 days from date
we received the package for us to process your return. All return
shipping charges must be prepaid.
13. DISPOSAL INFORMATION
Do not dispose of this product with other household waste.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, and to promote
the sustainable reuse of material resources, recycle it
responsibly. To discard your used device, please use the
return and collection systems or contact the retailer where the product
was purchased, for environmentally-safe recycling.
