37
FIGURE 8.1
FIGURE 8.2
FIGURE 8.3
FIGURE 8.4
TURNING YOUR PRESSURE WASHER ON
To turn your pressure washer on, do the following:
1.
Make sure the pressure washer was properly assembled and prepared
for use.
2.
Press the On/Off button (I) to turn your pressure washer on.
3.
Adjust the water jet according to the work to be performed.
4.
Release the lock-on button of the trigger gun and point the gun at the area
to be cleaned.
5.
Pull the gun trigger and perform the desired cleaning.
FIGURE 8.9
FIGURE 8.5
FIGURE 8.6
FIGURE 8.7
FIGURE 8.8
INPUT
NECESSARY MEASURES FOR WATER SUPPLY FROM OTHER SOURCES.
Please, use only water without impurities. Set up additional filters if there is a risk of sand present in the water
inlet (ex.: well water), Schulz recommends the use of a pre-filter for pressure water cleaners (the pre-filter is not
included with the pressure water cleaner).
Filter
*New version