Schulthess WEI 9080, Operating Instructions Manual, Page: 53 / 60

53
Extended basic settings
+ +
u By pressing these three buttons at the same time,
the display shows the extended basic settings.
u Repeatedly pressing the button shows the
possible settings.
u Pressing the button allows the settings to be
changed.
u
Pressing the button interrupts the display of the
settings.
Skincare function (ex factory OFF)
Select «Extended basic settings»!
If the skincare function is switched on, two extra rinses
are added to each wash programme. These additional
rinses can prevent skin allergies.
Child lock (ex factory OFF)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing or
deletion of a programme by small children.
Operating the machine with the child lock switched on:
+
Hold the start button down and press the fast forward
button.
Rinsing stop (ex factory INDIVIDUAL)
Select «Extended basic settings»!
If this function is switched on, all easy care, fine wash or
shirt programmes automatically add a rinsing stop.
Memory function (ex factory OFF)
Select «Extended basic settings»!
If the memory function is switched on, the selected
tem perature and spin additional functions are saved for
each programme. If the same programme is selected
again, the stored values are automatically used. The
values can then be altered.
With switched on memory button function, the special
programme last used is stored and appears again as
first on the display when next pressing the
but-
ton. Following this, the consecutive programmes can
then be selected through repeatedly pressing the but-
ton.
This way, a frequently used special programme can be
called up with only one press of the button.
When the function is switched off, the programme to
appear will always be the first programme in this pro-
gramme group.
The same applies to the profiClean programmes.
Soap wash programme (ex factory OFF)
Select «Extended basic settings»!
When this programme is switched on, an extra rinse is
added.
Soak programme (ex factory OFF)
Select «Extended basic settings»!
When this programme is switched on:
soaking time of up to 12 hours.
u After the programme is selected by pressing the time
preselect additional function button, set the desired
soaking time.
l The soaking time set or remaining is displayed until
the programme starts (1h -12h).
u The soaking time starts when the start button is pres-
sed.
u Soaking can be interrupted and the wash
programme started by pressing the Quick Wash button.
Note:
u Add soaking detergent directly to the drum.
(Detergent dosing see chapter «Detergents and care
addi tives/Detergent dosing»).)
u The soak programme must be reprogrammed for
each wash.
u The current soaking time is stored in the event of a
power cut. The duration of the power cut is not taken
into account.
Cool down function (ex factory OFF)
Select «Extended basic settings»!
Detergent solution cooling: When the detergent
solution cooling function is switched on, boiling water is
cooled with cold water at the end of the washing pro-
cess.
This helps to prevent damage to older drains.
This cooling always takes place in the easy care pro -
gramme, irrespective of this setting. This helps to
prevent creases.
Loosening up at programme end (ex factory ON)
Select «Extended basic settings»!
When this function is selected, the laundry is tumbled
for 5 minutes at the end of the programme.
Wash time reduction (ex factory ON)
Select «Extended basic settings»!
When this function is switched off, the boil, coloureds
and easy care programmes are longer.
LCD Brightness (ex factory 220)
Select «Extended basic settings»!
The
button can be used to alter the brightness or
type on the display.