73
Option B
►
Wait for approx. 1 hour.
Then press button
and switch immediately forward
to
Spin
by pressing
Forward
. Usually the laundry will be
spun and the programme finishes as usual.
►
Repeat the wash programme, however without any deter-
gent.
►
Reduce detergent dose in the future.
►
If required use washing powder instead of liquid detergent.
Foam leaks from
the detergent drawer
during washing,
rinsing or spinning
Too much detergent was used.
►
Stop the programme by pressing button
Cancel
.
►
Proceed as with error message
Water level too high
.
►
Reduce detergent dose in the future.
►
If required use washing powder instead of liquid detergent.
Puddles and / or water
stains form on the
floor
Too much detergent was used.
►
Reduce detergent dose in the future.
►
Check whether the supply and drain hose connections are
watertight and have been effected properly.
SPINNING AND NOISE
Pump noise
No error! Intake noise and «Emptying» noise by the
detergent solution pump is normal.
Repeated spinning
The appliance detected an imbalance and is rectifying the
imbalance by spinning repeatedly.
Poor spin result
The machine has detected an imbalance that it was unable
to rectify.
If there are loads too low or critical laundry pieces, e.g.,
bathroom rugs, the laundry cannot be distributed suffi-
ciently. In this case the spin speed is reduced in a targeted
manner to protect the appliance from extensive stress.
Vibrations during
washing and spinning
«Machine movements»
during spinning
The transport securing devices have not been removed.
►
See the information in the Installation Instructions.
Machine feet were not locked when installing the machine.
►
Relevel the machine with a spirit level and securely lock
the feet as prescribed in the Installation Instructions.