Schulthess 8230.1, Instructions For The Use

Page: 65 / 68

The drying target was not achieved:
When warm, laundry feels more moist than it actually is!
Remove the laundry from the dryer and let it cool.
When still moist:
u
Clean filter (See chapter «Drying, Cleaning the filter»).
u
Increase degree of drying (see chapter «Basic settings»)
u
Clean moisture sensor (see chapter «Cleaning and
Maintenance»).
The individual laundry piece does not reach the
set drying target:
u
If one single piece is to be dried in the dryer, it will be
dried more evenly by adding additional pieces as ballast,
e.g. two (dry) terry towels.
The drying takes too long:
u
Clean filter (See chapter «Drying, Cleaning the filter»).
u
Power failure (note lock times of EW).
The laundry is not dry after the maximum
possible settings:
u
Drum is overloaded (see chapter «Programme survey»).
u
Laundry not sufficiently spun.
u
Insufficient room ventilation (open a window or door).
u
The filter is blocked with fluff (See chapter «Drying,
Cleaning the filter»).
u
Clean air cooler (see chapter «Cleaning and Mainte-
nance»).
Drum lighting does not work:
u
Faulty light bulb. For safety reasons, the lamp should
only be replaced by customer services or a specialist.
Dampness in the room increases significantly:
u
The room does not have sufficient ventilation.
Ensure adequate ventilation.
Door does not open:
u
If no power is available to open the door, you can open
the door manually by pressing next to the door lock.
Washing is wrapped up:
u
Use special programmes «bed clothes» or «towelling».
Customer Services
Before you call customer services, check whether you can
rectify the problem yourself (see chapter «Problems»).
If advice is required, costs may be incurred if a service
technician is required, even during the guarantee period.
If you cannot rectify a problem yourself, unplug the
machine or switch it off at the wall and call customer
services.
Dial the central customer services number (see back cover).
You will be automatically connected to the customer ser-
vices branch for your region.
Give customer services product and serial numbers.
You will find this information on the type label on the
inside of the door.
Note the numbers for your machine here:
Product No.:
Serial No.:
Guarantee subscription
After the end of the normal 2 years guarantee period, this
can be extended if required with a guarantee subscription.
We will be happy to send you the relevant documents.
Please see also the enclosed guarantee and customer ser-
vices booklet.
65