Schulthess 8230.1, Instructions For The Use

Page: 61 / 68

Extended basic settings
+ +
u
By pressing these three buttons at the same time, the
display shows the extended basic settings.
u
Repeatedly pressing the button shows the
possible settings.
u
Pressing the button allows the settings to be
changed.
u
Pressing the button ends the display of the
settings.
Child lock (ex factory
OFF
)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing
or deletion of a programme by small children.
Start a programme with the child lock switched on:
+
Hold the start button down and press the fast forward
button.
Button memory (ex factory
OFF
)
Select «Extended basic settings»!
With switched on memory button function, the special
programme last used is stored and appears again as first
on the display when next pressing the
button.
Following this, the consecutive programmes can then be
selected through repeatedly pressing the button.
This way, a frequently used special programme can be
called up with only one press of the button.
With switched off function the «Bed linen» programme
appears as first.
Reduced mains power (ex factory
OFF
)
Select «Extended basic settings»!
If the mains voltage is reduced, the programme times will
be extended accordingly.
Off = 400 V 3 N ~ 5,3 kW / 10 AT
On = 400 V 2 N ~ 3,7 kW / 10 AT
LCD Brightness (ex factory
150
)
Select «Extended basic settings»!
The button can be used to alter the brightness or
text on the display.
LCD Contrast (ex factory
26
)
Select «Extended basic settings»!
The button can be used to alter the contrast on the
display.
Summer noise level (ex factory
Volume 2
)
Select «Extended basic settings»!
With the Alarm setting switched on, a signal sounds at
regular intervals at the end of the programme.
The level can be adjusted in 3 levels.
Off
Level 1
Level 2
Level 3
Standby function (ex factory
ON
)
Select «Extended basic settings»!
When the standby function is switched on, the controls
switch off when no drying programme is running in
energy saving mode. All displays are dark.
Optical interface (ex factory
OFF
)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer
services can communicate with the machine by PC.
Default language (ex factory
GERMAN
)
Select «Extended basic settings»!
If another language is temporarily selected via the select-
language button
button or the buttons and
, 4 minutes after programme end, in standby mode
or after a long standstill, the setting reverts back to the
default language.
61