Schulthess 7297.1, Instructions For The Use, Page: 63 / 68

Crease protection (ex factory
30 MIN
)
«Light dry + «Fast forward»
When this function is switched on, the crease protection
phase begins at the end of the programme.
Time (the time is not set ex factory)
«Extra dry + «Fast forward»
The hours can be set using the
«Wardrobe dry»
button
and the minutes using the
«Extra dry»
button.
Language (ex factory
DEUTSCH
)
«Top5» + «Fast forward» ÷ «Fast forward»
This setting is temporarily valid for the selected programme
and reverts back to the default language a few minutes
after completion of the proygramme.
See chapter «Advanced basic settings/default language»
Extended basic settings
«Light dry» + «Wardrobe dry» + «Fast forward»
u
By pressing these three buttons at the same time, the
display shows the extended basic settings.
u
Repeatedly pressing the
«Light dry»
button shows the
possible settings.
u
Pressing the
«Wardrobe dry»
button allows the set-
tings to be changed.
u
Pressing the
«Fast forward»
button ends the display
of the settings.
Child lock (ex factory
OFF
)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing
or deletion of a programme by small children.
Start a programme with the child lock switched on:
«Start» + «Fast forward»
Hold the start button down and press the fast forward
button.
Button memory (ex factory
OFF
)
Select «Extended basic settings»!
With switched on memory button function, the special
programme last used is stored and appears again as first
on the display when next pressing the
button.
Following this, the consecutive programmes can then be
selected through repeatedly pressing the button.
This way, a frequently used special programme can be
called up with only one press of the button.
With switched off function the «Reconditioning» program-
me appears as first.
LCD Brightness (ex factory
150
)
Select «Extended basic settings»!
The
«Wardrobe dry»
button can be used to alter the
brightness or text on the display.
LCD Contrast (ex factory
26
)
Select «Extended basic settings»!
The
«Wardrobe dry»
button can be used to alter the
contrast on the display.
Summer noise level (ex factory
NOISE LEVEL 2
)
Select «Extended basic settings»!
With the Alarm setting switched on, a signal sounds at
regular intervals at the end of the programme.
The volume can be adjusted in 3 levels.
Off
Noise level 1
Noise level 2
Noise level 3
Standby function (ex factory
ON
)
Select «Extended basic settings»!
When the standby function is switched on, the controls
switch off when no drying programme is running in
energy saving mode. All displays are dark.
Optical interface (ex factory
OFF
)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer
services can communicate with the machine by PC.
Default language (ex factory
DEUTSCH
)
Select «Extended basic settings»!
If another language is temporarily selected via the keys
«Top5»
and
«Fast forward»
, 4 minutes after programme
end, in standby mode or after a long standstill, the set-
ting reverts back to the default language.
63