
OPERATION
SRW1400 08/16
Operation Section 4-5
© 2016 Alamo Group Inc.
OPERA
T
ION
3.3 Tractor Horsepower
The horsepower required to operate the implement depends on several operating factors including terrain
condition, operator experience, condition of the implement and tractor, and other factors. The recommended
tractor HP for the SRW1400 is 40-80 HP (30-60 kW). Operating the implement with a larger tractor will greatly
increase the risk of damaging the implement.
3.4 Drawbar
Position the length of the drawbar from the end of
the tractor PTO shaft to the drawbar hitch hole
according to the operating speed of the implement.
This implement is a 540 RPM unit, position the
drawbar length from shaft end to hitch hole at 14”.
IMPORTANT:
Damage to the tractor PTO and the
implement can result if the drawbar is set
incorrectly. Check and make and Make adjustments
if necessary.
3.5 Tractor Hydraulics
The windrower has two hydraulic cylinders one is used to lift the height of the drum up or down. The second
one is used to set the hydraulic cylinder either in the transport positions or working position. The hydraulic
cylinders are operated by the tractors hydraulic pump. The tractor requires a 5 gpm @ 1800 PSI, dual remote
outlet.
3.2 Tractor Safety Devices
If transporting or operating the tractor and implement near a public roadway, the tractor must be equipped with
proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible from the rear of
the unit. Lights and a SMV emblem must be equipped directly on implements if the visibility of the tractor
warning signals are obscured.
Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were
removed for access to connect, service, or repair the tractor or implement. Never operate the tractor PTO
with the PTO master shield missing or in the raised position.
OPS-U- 0004
3.6 Front End Weight
A minimum of 20% total tractor weight must be maintained on the tractor front end at all times. Front end
weight is critical to maintain steering control and to prevent the tractor from rearing up while driving. If the
front end is too light, add weight until a minimum of 20% total weight is reached on the front tires. Front
weights and weight carriers can be purchased through an authorized tractor dealership.
OPS-U- 0005
Summary of Contents for SRW1400
