manualshive.com logo in svg

Schulte FX-742, Operator'S Manual

Share
Download
Schulte FX-742 Operator'S Manual Download Page 49

ASSEMBLY

FX-742   07/16

Assembly Section 3-3

© 2016 Alamo Group Inc.

ASSEMBL

Y

HYDRAULIC CIRCUITS

Adjust the hoses in the hose organizer to allow sufficient slack for turning. Ensure the hoses will not contact the
driveline, will not bind while turning or can become pinched. 

Wing System

If the rotary cutter has been supplied to you already assembled it is possible that the wing lift
hydraulic cylinders are not completely filled with oil. An indication of this is that the wing lock
up pins cannot be removed freely.

First fully retract the wing cylinders then remove the wing lock up pins.

The wing lift system is marked in blue at the tractor connection.

Refer to the Parts Manual for a complete list of fittings and hydraulic hose part numbers.

Never force the wing lift lock pins out of their lock position as the wings may suddenly drop
causing injury or even death.

Summary of Contents for FX-742









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands