16
4.4 Grip rings
If the
dynamic pacer
is used as an anterior
gait trainer, it is recommended to mount the
grip rings (
A
) in front of the cross strut (
B
) of
the top frame (
C
). This creates stable positi-
oning and leaves sufficient space for further
accessories. In the
pacer.
(Size 0 mini) the grip
rings (
A
) are mounted at the front of the base
frame (
D
).
The grip rings (
A
) can be mounted on both
the outside and on the inside of the frame
for thinner users. In this way, the grip rings (
A
)
can be positioned close to the user in any
situation.
Release the twist grip (E) to:
• remove the adapter (
F
) with the grip
rings (
A
).
• Move the grip rings down (
A
) including that
of the adapter (
F
).
To adjust the height of the grip rings (A):
• Press the button (
G
), bring the grip ring (
A
)
into the required height and then release
the button (
G
) again. An audible clicking
noise is heard when the grip ring (
A
) enga-
ges in the adapter (
F
).
To change the alignment of the grip rings (A):
• Press the button (
G
), pull the grip ring (
A
)
out of the adapter (
F
) and insert the grip
ring (
A
) in the required alignment back into
the adapter (
F
).
To adjust the angle of the grip rings (A):
• Loosen the wing screw (
H
), bring the
grip ring (
A
) into the required angle and
re-tighten the wing screw (
H
).
To prevent injuries, do not mount the grip rings onto the foremost end of the top
frame (I)!
Then firmly re-tighten the screws again after each setting/adjustment!
4. Accessories.
I
D
A
H
G
F
A
B
F
E
A
C
Summary of Contents for rifton dynamic pacer
Page 1: ...Instructions for use dynamic pacer The dynamic gait trainer dynamic pacer ...
Page 42: ...42 Notes ...
Page 43: ...43 Notes ...
Page 44: ...schuchmann de GA 33 EN_1 0 ...
