21
4.9 Torso support
Mount the torso support (
A
) directly behind
the oval crossbar on the top frame and/or
the base frame. A safety loop is mounted on
the front side of the torso support (
A
). The
torso support can simply be opened and clo-
sed through plug locks (
D
).
To adjust the width:
• Position the adapter clamps (
B
) with the
torso support (
A
) in any position on the top
frame and/or the base frame.
• Loosen the wing screws (
C
) and bring the
torso support (
A
) into the required position.
In order to turn the torso support (A):
• Completely unscrew the wing screws (
C
).
• Turn the torso support (
A
) in the required
position.
• Mount the wing screws again (
C
) and tigh-
ten them.
In order to adjust the height of the torso support (A):
• Press the buttons (
E
), bring the torso support (
A
) into the required height
and let go of the buttons (
E
) again.
• An audible clicking noise is heard when the adapters have engaged.
In order to reposition or remove the entire torso support (A):
• Loosen the adapter clamps (
B
).
• Push the torso support (
A
) backwards or forwards.
• In order to remove the adapter clamps (
B
) including the torso
support (
A
), see
Point 4.2
.
The straps (
F
) can be adapted independently of one another in order to
tighten the torso support (
A
) or to loosen it. In addition, the tilt angle of
the user can thus be adjusted. The torso support (
A
) can be opened both
at the front and to the rear. In this way, anterior or posterior utilisation are
facilitated.
Position the user in the dynamic pacer so that the user's centre of gravity lies
between the castors.
Then firmly re-tighten the screws again after each setting/adjustment!
4. Accessories.
A
E
C
D
B
B
F
Summary of Contents for rifton dynamic pacer
Page 1: ...Instructions for use dynamic pacer The dynamic gait trainer dynamic pacer ...
Page 42: ...42 Notes ...
Page 43: ...43 Notes ...
Page 44: ...schuchmann de GA 33 EN_1 0 ...