23
7.4 Spare parts
Use only original accessories and original spare parts from Schuchmann,
as otherwise the safety of the user is endangered and the warranty ex-
pires. Should you wish to order spare parts, please contact the specialist
dealer who supplied you with the product, stating the serial number of the
therapy chair (see
Point 10.5
). Necessary spare parts and accessories must
only be installed by trained personnel.
7.5 Duration of use and re-use
The expected duration of use of our product, dependent on the usage in-
tensity and amount of re-use, totals up to "8" years if the usage takes place
in accordance with the information in these Instructions for use. It may be
possible to use the product over and above this time period if it is in a
safe condition. The expected duration of use does not refer to wear parts,
such as for example wheels, gas pressure springs,... . The maintenance and
evaluation of the condition, and if applicable the potential for re-use, must
be decided by the specialist dealer. The product is suited for re-use. Prior
to forwarding on, please follow the cleaning and disinfection instructions
stated in
Point 7.1
. Accompanying documents such as these Instructions
for use are part of the product and must be passed on to the new user.
No disassembly is required prior to re-use. In the case of storage, it is re-
commended to fold the product to the smallest dimension to save space.
Should a serious incident occur during the service life of the product despite
being used as intended, this must be reported immediately to the manufacturer
and the competent authority.
7.6 Mounting / repairing the tyres
The tyres are mounted / repaired like standard bicycle tyres. Before inser-
ting the new inner tube, make sure that the rims and inner wall of the tyres
are free of foreign particles. After mounting or repairs check the tyre pres-
sure. Tyre pressure in line with the regulations and tyres in perfect condition
are important requirements for safety and for the driving characteristics of
seat pan sub-frame. The correct tyre pressure is stated on the respective
tyre casing or in the technical data (see
Point 8.2
)
7. Cleaning and maintaining.
