13
3.6 Back unit adjustment
The complete back unit can be adjus-
ted in the depth of the seat pan / seat
unit. Remove the 4 screws (arrows) on
the right and left of the top frame, sli-
de the back unit out or in and insert
the screws again and tighten.
3.7 Push handles
The push handles of the
floyd.
can
be adjusted individually in height. This
takes place after loosening the two
clamp levers (
A
) on the rear tubes. The
clamp lever must be tightened again
after each adjustment.
3.8 Push bar
The design with the push bar is a more
comfortable solution. The angle of the
push bar can be individually adjusted
in addition to height adjustment using
the joints with quick release (
B
). The
height is adjusted after loosening the
two clamp levers (
C
) on the rear tubes.
The clamp lever and quick release
must be tightened again after each
adjustment.
3. Settings.
A
A
B
C