SCHOTT Termofrost AGD3 Installation Manual Download

Page: 15 / 16

SCHOTT

Termofrost

SCHOTT

Termofrost

Page 15

9.1 Spareparts for AGD3 door

Spare parts needed for repair or maintenance operations can be obtained quickly and easily. Please feel free to
contact SCHOTT Termofrost

®, or your local dealer for a complete list of available spare parts.

9.2 Spareparts for Frame

KIT HINGEPLATE AGD3/TAGD3

COVER AGD3/TAGD3
P8355 PC-FR LOWER L=1188
P8355 PC-FR LOWER L=0594,5

GASKET AGD3/TAGD3
KIT P8360 GASKET L=1249
KIT P8360 GASKET L=0624,5

KIT AGD3 LOWER HINGE LEFT
KIT AGD3 LOWER HINGE RIGHT

KIT HANDLE ALUMINIUM AGD3/TAGD3

KIT DOOR AGD3/TAGD3 HINGE UPPER

KIT TAGD3 LOWER HINGE LEFT
KIT TAGD3 LOWER HINGE RIGHT

GASKET AGD3
P8358 SILICONSEAL HAND L=2000
TO BE CUTTED INTO DOOR HEIGHT

GASKET AGD3
P8359 SILICONSEAL HAND L=2000
TO BE CUTTED INTO DOOR HEIGHT

Summary of Contents for Termofrost AGD3

















Search results

Summary of Contents for Termofrost AGD3

Reviews:

Related manuals for Termofrost AGD3

Brands by name

Popular brands

SCHOTT Termofrost AGD3, Installation Manual

Search results

Summary of Contents for Termofrost AGD3

Reviews:

Related manuals for Termofrost AGD3

Brands by name

Popular brands