SCHOTT Termofrost AGD3 Page 4 Installation Manual Download

Page: 4 / 16

SCHOTT

Termofrost

SCHOTT

Termofrost

Page 4

3. Recommended tools and a

ccessories for the installation

These parts are NOT part of the delivery

Name

Illustration

Hexagon Wrench 4 mm

Measuring tape

Rivets Alu Ø4,8x10 (4 rivets per system)
Rivets Alu Ø4,8x25 (8 rivets per system)
Rivets Alu Ø3x10 (6 rivets per line)

Self drilling screws

Ø4,8x30 (3 screws per system)

Self drilling screws

Ø3,9x15 (3 screws per system)

Riveter (electrical if possible!)

Drilling machine

Water level with electronic display

Angle grinder

Metal saw

Classical tool box with hammer, cutter, file, etc.

Ladders (the height of the cabinets is approx. 2,20m)

Cleaning sponges and glass cleaner

Hoover for cleaning the cabinets (-> metal spans !)

Important Remark:

Screws are not recommended by Schott but can be used in some particular cases!

Summary of Contents for Termofrost AGD3

















Search results

Summary of Contents for Termofrost AGD3

Reviews:

Related manuals for Termofrost AGD3

Brands by name

Popular brands

SCHOTT Termofrost AGD3, Installation Manual

Search results

Summary of Contents for Termofrost AGD3

Reviews:

Related manuals for Termofrost AGD3

Brands by name

Popular brands