- 4 -
The GA-92XT unit can be operated either in the open or closed position and any position in between (see
figure 2).
NOTE: In the closed position using non-lithium batteries, a slight signal may be detected in the high gain
settings even if no ferrous material is present. This can be avoided by 1) Decreasing the gain of the unit, 2)
Operating the unit in the extended position or 3) Using a lithium battery.
Open
position
Closed
position
Figure 2. Open and Closed positions
The GA-92XT has an internal detent mechanism to keep the unit in either the fully extended (open) or fully
retracted (closed) positions. To extend unit grasp looped end of locator and pull until shaft locks into place.
To return unit to the closed position, push looped end back into shaft, unit will lock into place.
Turn-On, Volume and Sensitivity Settings
GA-92XTi Face Plate
GA-92XTd Face Plate
Figure 3. GA-92XT Face Plates
Summary of Contents for GA-92 XT
Page 19: ... 19 ...
