GBA Z 0681 2 E
BA
Page 14 of 28
November 9, 2020
Last revised 11-2020
Rev. 2
Scho
ll Ap
parat
eb
au
G
mb
H &
C
o
.
KG
3.8 E
LECTRICAL INSTALLATION
CAUTION
If the voltage is wrong, the induction unit can be
damaged.
The installation of the electricity must be fitted by approved installation contractors in accordance with
specific national and local installation in conformity with all safety regulations. The warning signs and rating
plates on the units must strictly be followed.
Check and ensure that the supply voltage and the line current match the specifications given on the rating
plate.
Max. tolerance of supply voltage
+6/-10%
Supply frequency
50/60Hz
• Turn control knob to OFF-position („ “)
• Connect operating unit to the generator
• Connect the coil cables to the plugs fixed at the front of the case
• Connect each built-in frame to earth at the respective bolts
• Connect the unit to the power socket
The installation is now finished and an operating test must be done according to chapter “operation test”.
