33
14. Service and maintenance
14.1. Maintenance
Wear parts of the AIR Flocker PRO must be checked for wear at regular inspection intervals
and replaced if necessary.
The wearing parts are the spiral brush lining of the metering brush, the nylon flap bearings
and the carbon brushes in the drive motor of the metering brush.
To avoid electric shocks, the AFP must be disconnected from the power supply before
maintenance.
Maintenance and cleaning work may only be carried out by appropriately trained personnel.
Only use lukewarm water with a mild cleaning agent to clean the AFP.
The description of the inspection of the drive motor and the replacement of the carbon
brushes is carried out exclusively by SCHNIER Elektrostatik GmbH or by an expert
authorized by SCHNIER Elektrostatik GmbH.
14.2. Cleaning
Regularly remove flock that has deposited on the AIR FLocker PRO, in and on the air hose
and the flocking gun. If you change the flock, remove residual flock from the flock supply
container, the PU air hose, the flocking gun and the flock funnel beforehand.
Regularly remove adhesive from the handle of the flocking gun and the ball electrode. In
particular, the switch should be regularly cleaned of adhesive and flock.
Clean the plug of the high-voltage connection regularly.
LED
Meaning
possible cause
fixing
operation
AFP on power
and switched on
Ground monitoring
poor / no grounding
grounding AFP correctly
malfunction
look below
look below
high voltage
Button from Flocking Gun
is pressed
possible malfunction
Low voltage of the
internal power supply
Hardware failure
AFP for review
to SCHNIER
Hardwaredefekt
der begrenzten Überspannung
Hardware failure
AFP for review
to SCHNIER
Hardwaredefekt der
Ist- Strommesseinrichtung
Hardware failure
AFP for review
to SCHNIER
Programspeicher ist nicht
in Ordnung
Hardware failure
AFP for review
to SCHNIER
Summary of Contents for 810489
Page 1: ...1 Art Nr 810489 80 kV 300 A...
Page 37: ...37...
