Schneider Kreuznach Kino-Linear, User Manual

Page: 3 / 8

ATTACHMENT OF LENS TO KINO-LINEAR ™ MECHANISM
Assembly Instructions:
1. Remove Kino-Linear™ mechanism and
Cine Digitar 1.33x anamorphic lens, if
purchased together, from packaging. Inspect
all components for damage that may have
occurred during shipping.
2. Place Kino-Linear™ base on table with
sliding stage facing up. Attach lens holder to
the stage using the four stage lock screws
provided. Note that the frame clamp needs to
be positioned toward the back of the Kino-
Linear™ base. See
Illustration # 1 .
3. Insert lens into the frame clamp of the
Kino-Linear™ as illustrated. The lens should
seat firmly into the clamp. Further loosen the
frame clamp lock screw if needed.
See
Illustration # 1 .
4. Insert the retaining ring into the frame clamp
and tighten the two retaining ring screws.
See
Illustration #2 .
5. Align the lens, rotating it until the flat sides of
the inner bezel are vertical. Tighten the frame
clamp screw. See
Illustration #3 .
6. Mount safety lanyard to projector mount
securely for safety.
Illustration #1 - Rear View of Kino-Linear™ with Lens Installed
Illustration #2 - Detail of Lens Retaining Ring
Illustration #3 - Front Detail
Page 2
Tools Required:
1. Screwdriver: No. 1 Phillips
2. Allen Wrench: 3mm, 3.5mm, 4mm, 1/16”, 5/32”