Schneider Airsystems D 322 301, Original Operating Manual

Page: 4 / 52

I/2
SBS-SET
GB
Table of contents - Part 1
1.1 Scope of delivery
– Axial grinder
– Tool fitting 3 mm
– Tool fitting 6 mm
– Assembly key ( 2 x )
– Grinding Pen with shaft 3 mm ( 5 x )
– Grinding Pen with shaft 6 mm ( 5 x )
– Plastic case
– Instruction manual
1.2 Conventional use
The compressed air tool is an industrial tool
suitable for:
Grinding, deburring, milling and rust remov-
al.
Any other type of use is considered contrary
to the intended use.
1.3 Technical data
see Figure A
1.4 Symbols and their meaning
1.5 Components
1.6 Commissioning
Caution: Depressurise the unit!
Assembly:
1. Hold the shaft (item 05) using the as-
sembly key (Fig. 2a).
2. Slacken the clamping nut (item 06) us-
ing the second assembly key (Fig. 2a).
3. Insert the relevant tool fitting (item 04)
(Fig. 3a).
4. Screw the clamping nut (item 06) loosely
onto the shaft (Fig. 4a).
5. Insert the abrasive / tool at least 15 mm
into the tool fitting (item 04) (Fig. 5a).
6. Hold the shaft (item 05) and tighten the
clamping nut (item 06) using the correct
assembly key (Fig. 5a).
1.1 Scope of delivery ...................... 2
1.2 Conventional use ...................... 2
1.3 Technical data .......................... 2
1.4 Symbols and their meaning ........ 2
1.5 Components............................. 2
1.6 Commissioning ......................... 2
Power [kW]
Air consumption [l/min]
Max. permissible pressure [bar]
Working pressure [bar]
Rotational speed [rpm]
P
Q
p
max
P
n
Tool fitting (collet chuck) [mm]
Sound pressure level L
pA
(at dis-
tance of 1 m) as per EN ISO
15744 [db(A)]
Vibrations as per ISO 8662
[m/s
2
]
Recommended hose diameter
(inner) at L= 10 m [mm]
Overall dimensions: width x
depth x height [mm]
Weight [kg]
01 Plug nipple
02 Trigger lever
03 Air regulation
04 Tool fitting
05 Drive shaft
06 Clamping nut
08 Safety lever
L
pA
10 m
H T
B
m