Schmidt SS 20.501, Instructions For Use Manual

Page: 26 / 48

Seite 26
Flange mounting
•
Screw-tighten the flange to the duct wall via the three mounting bores.
•
Pull protective sleeve from sensor head 9 .
•
Slide sensor along with sensor tube 7 into mounting flange 300227 (not
included in the delivery) and fasten it at the desired position by means
of the clamping screw.
Note: The mounting flange is not pressure-tight and may only be used in
pressure-free systems.
Abbreviations in the mounting drawings:
AL = stand-out length, SL = welding stud length, L = sensor length, L
DGV
= length
of through bolt joint, MET = minimum immersion depth, D
A
= tube outer diameter