7
3.2 Fastening the Q Tensionmeter
Two MOUNTING HOLES are provided for fastening the tensionmeter on site.
For the MOUNTING HOLE dimensions see the above drawing (fig. 3.2).
MOUNTING HOLES
M6 thread
fig. 3.2
12.5 mm
24 mm
40 mm
3.3 Inserting the Material to be Measured
- Thread the material to be measured carefully through the MEASURING ROLLER and
ROLLER GUIDES, as shown in fig. 3.3.
To avoid damage do not move the center roller by hand using force.
It is important to ensure that the MEASURED MATERIAL runs smoothly through the
ROLLER GUIDES and the MEASURING ROLLER.
- You can now read the measured tension on the SCALE.
MEASURING ROLLER
ROLLER GUIDES
MEASURED MATERIAL
SCALE
fig. 3.3