7
SW-TI3
: »TENSION INSPECT 3« Software for PC with Win 7 or higher
2.4 Optional Accessories
Tension meter with Li-Ion battery 18650
1 carrying case
1 USB AC adapter for 100 - 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ)
1 Operating Instructions
1 Vacuum base
2.3 Delivery Includes
The requirements of the CE specification are only complied with if the ten-
sion meter is equipped and operated with connecting cables supplied by
HANS SCHMIDT & Co GmbH. Certification to the CE specification does not
extend to, and shall be invalid for any other combination. Under no circum-
stances shall HANS SCHMIDT & Co GmbH be held liable for any damage re-
sulting from the use of non-SCHMIDT sensors or cables.
2.2 Connecting the Tension Meter
2.5 Unpacking
Unpack the tension meter and inspect it for any shipping damage. Notices of defect must
be announced immediately, at the latest within 7 days on receipt of the goods.
Have you read and understood the Operating Instructions, in particular
Chapter 1 “Basic Safety Notices”? You are not permitted to operate the
instrument before doing so.
Before working with the instrument you must put on your personal protective
clothing, if necessary. For example, eye protectors, gloves, etc.
To avoid damage, do not move the center roller by hand.
Tensions that exceed the tension range of the instrument by more than 100%
may cause permanent damage to the measuring spring and must be avoided
under any circumstances.
The ID plate with the CE mark and the serial number as well as the calibration
label (optional) and the SCHMIDT Quality Seal are provided at the rear side of the
instrument.
3 Operations
3.1 Notes before starting measurement
