6
2.3 Items Supplied
Measuring instrument
1 Operating Instructions
2.4 Unpacking
Unpack the instrument and inspect it for any shipping damage. Notices of defect must be
announced in writing immediately, at the latest within 7 days on receipt of the goods.
2.2 Available OptionsAir damping
(Option up MK-100)
We recommend application of the
dashpot in the case of high tension
fluctuations. (Spooling or winding
machines)
Code
D
:
Tension-detecting contacts
We recommend application of the ten-
sion-detecting screw contacts in the case
of automated production sequences.
3 Operation
3.1 Notes Before Starting Measurement
Have you read and understood the Operating Instructions - in particular
Chapter 1, “Basic Safety Notices”? You must not operate the device before.
Before working with the device you must put on your personal protective
equipment, if necessary. For example, eye protectors, gloves, etc.
To avoid damage, do not move the center roller by hand.
Tensions that exceed the measuring range of the device by more than 100%
may cause a permanent deformation of the measuring spring and must be
avoided under any circumstances.
The ID plate with the serial number as well as the calibration label (optional) are
provided on the bottom of the instrument, the SCHMIDT Quality Seal are provided
on the surface.
