Schmidt
Mess- und Regeltechnik
3
©2010 Schmidt
Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
Installation and Operating Instructions
Flap-Type Flow Meter KLA
1. Foreword
These Installation and Operating Instructions are applicable to devices of Series KLA. Please
follow all instructions and information given for installation, operation, inspection and maintenance.
The instructions form a component part of the device, and should be kept in an appropriate place
accessible to the personnel in the vicinity of the location. Where various plant components are
operated together, the operating instructions pertaining to the other devices should also be
observed.
2. Safety
2.1. Symbol and Meaning
!
Safety notice
This safety notice can be found at all hints on work safety in these assembly and operating
instructions pointing out hazards for life and limb of persons. Such notices should be strictly
observed.
2.2. General Safety Directions and Exemption from Liability
This document contains basic instructions for the installation, operation, inspection and
maintenance of the flap-type flow meter. Failure to comply with these instructions can lead to
hazardous situations for man and beast and also to damage to property, for which Schmidt Mess-
und Regeltechnik disclaims all liability.
The operator is required to rule out potentially hazardous situations through voltage and released
media energy.
2.3. Intended Use
The KLA Series device is a flap-type VA flow meter for fluids. It is designed for installation in
horizontal or vertical pipe runs. In vertical pipe runs, flow through the device must be from below.
Installation in the pipeline may only be carried out in accordance with these instructions. Select the
version of the flap-type VA flow meter on the basis of the pipe diameter at the installation location of
the device. The limit values for the device are specified in section 10 and must be complied with.
Any modifications or other changes made to the measuring device may be carried out solely by the
manufacturer. Details pertaining to the fluid product and operating conditions are noted on the
scale.
2.4. Special Safety Directions for Glass Devices
!
For safety reasons, we recommend placing a protective shield in front of the
measuring device before starting up flow meters fitted with glass panels. The devices
should not be operated where there is risk of pressure surges!
