7
3.1 Notices Before Starting Measurement
Have you read and understood the Operating Instructions, in particular
Chapter 1 “Basic Safety Notices” ?
You are not permitted to operate the device before doing so.
Before working with the device you must put on your personal protective
clothing, if necessary. For example, eye protectors, gloves, etc.
To avoid damage, do not move the center roller by hand.
Tensions that exceed the tension range of the instrument by more than
100 % may cause permanent damage to the movement and must be avoided
under any circumstances.
The ID plate with the serial number as well as the calibration label (optional) are
provided on the bottom of the instrument, the SCHMIDT Quality Seal are pro-
vided on the surface.
1 Tension meter
1 Special finger support
1 Hex key (with Code
A,
dashpot with hex-head screw)
1 Certificate of Compliance with the order 2.1 under EN 10204
1 Operating Instructions
1 Carrying case
2.3 Delivery Includes
Unpack the tension meter and inspect it for any shipping damage.
Notices of defect must be announced immediately, at the latest within 7 days on receipt of
the goods.
2.4 Unpacking
3 Measuring
fig. 3.1
SCHMIDT Quality Seal
Calibration label
(option)
ID plate with serial number
