Watson SHDSL Router
Operating Manual
Watson-SHDSL-Router-Manual.doc
Version 1.1-07
6-2
Revision: 2012-02-15
6.1.2 DSL Cable
The DSL cable should be a 4-pair unscreened cable (UTP) with RJ45 connector
on one end
6.2 Ethernet Interfaces
The Ethernet cables should be 4 pair unshielded (U/UTP Cat 5e) patch cable,
which is needed for optimal immunity to surges and ESD. Any allowed cable
construction may be used for the building installation if the patch cable nearest to
the CPE is of an unshielded construction. Ethernet patch cables up to 50 m in
length are recommended. Both crossed and normal wiring styles are supported
by the auto-crossover feature of the product.
8
1
Type: RJ45-8 (Front View)
Figure 6-2: Ethernet Connector
Pin No
Signal Name
1
Transmit Data +
2
Transmit Data -
3
Receive Data +
4
Not used
5
Not used
6
Receive Data -
7
Not used
8
Not used
Table 6-2: Ethernet Connector
