EFA reciprocating saws Translation of the operating instructions
EN
V 06.2021
14 of 27
4
Transport and storage
The machine has been tested and carefully checked in our factory before shipment.
The test ensures that the machine is working properly.
Despite all care taken, there is a possibility that the machine could be damaged during transport.
Therefore, check the machine for possible transport damage when unpacking it.
Warning
!
Safety instruction!
Do not remove the cutting edge guard
(if installed) until just before start-up.
Unpacking the machine
Remove all packaging materials and dispose of them in a professional and environmentally friendly manner.
Check the machine for possible transport damage.
Information on
disposal and recycling
can be found in
chapter 10
.
Storage of the machine
For safe storage of the machine, it is essential to observe the following instructions:
– Only store the machine in a dry, ventilated room.
– Only store the machine in a clean and dry condition.
– Protect the machine from corrosion.
