34
Parallel interface USP-PI
Mounting of the parallel interface USP-PI
The communication module USP-PI forms the universal interface for controllers that
cannot process serial positioning information. Signals of magnetic reed switches are
simulated with the help of the USP-PI.
Installing and connecting the USP-PI in the
control cabinet
The USP-PI is designed to protection type IP 00 and thus should be installed in a
closed control cabinet
.
Install the USP-PI at a vacant and suitable point on the standard bar in the control cabi-
net, where it cannot be soiled. The profile is designed so that you can simply clip the
board onto the standard rail.
Electronic components can heat up in operation.
Do not touch or cover them!
Connect the USP-PI as shown in the circuit diagram at the end of this mounting instruction.
Summary of Contents for USP-PI
Page 2: ...Seiten 3 30 Pages 31 58 Deutsch English...
Page 59: ......
