SAFETY INSTRUCTIONS
8 | EN
www.schmalz.com
30.10.02.00604/02
WARNING
Failure to follow the safety instructions
Personal injuries and damage to the system
► Compressed air or a vacuum could cause closed containers to explode or
implode. Check the products before use.
► Do not apply suction to any dangerous dusts, oil mists, vapors, aerosols, etc.
► Only use suitable and approved vacuum filters.
► Do not look into the exhaust air flow of the vacuum generator.
1.6 Intended use
The system is used to lift and transport workpieces such as lumber, wooden components, furniture
parts or similar materials that allow suction. Neutral gases in accordance with EN 983 are approved as
evacuation media. Neutral gases include air, nitrogen and inert gases. The device is not suitable for
manual handling. Operations using the device must take place in a secure area where no people are
allowed to enter.
The system is mounted on the load suspension provided by the customer using the T-slots designated
for this purpose. The customer also provides a control device.
The system can only be used when hung vertically. (You must consult the manufacturer regarding
tilted positions, as well as pivoting or tipping motions.)
1.7 Note on the type plate
The type plate contains important information about the device. The type plate is firmly attached to the
exterior of the device.
The type plate contains the following information:
-
Type
-
Part number
-
Year of manufacture
-
Serial number
The type, part number and year of manufacture are important information for identifying the device.
They must always be specified when ordering replacement parts and making warranty claims or other
inquiries about the device.