23
Pump Typ Z
Version: 27215 -G.1
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
6.3
Documentation for pump
operation
The following documents are enclosed:
•
Operator’s manual
•
Dimensional sketch
In case of complaints regarding the pump
motor, please contact us or the motor
manufacturer.
6.4
Data sheet
Please see the enclosed data sheet for the
actual dimensions of the pump delivered to
you.
7
Important Instructions
7.1
Factory repair
Please observe the following instructions if
the pump is sent back to the factory for
repair:
1. If you send the pump back to the
manufacturer for repair or an upgrade
then please be sure to enclose precise
details of the media that were delivered
by the pump.
3. Only pumps that are completely empty
and clean will be accepted for repair.
7.2
Ordering Spare Parts
When ordering spare parts please do not
fail to give us the following important
information:
•
Pump serial number and type descripti-
on
•
Delivery medium
•
Part number from the spare parts list
•
Part description
•
Material data from the specifications or
the order confirmation
With this information you make it much
easier for us to deliver the correct spare
part for your pump!
8
Spare parts list and
drawing
If corresponding laws apply in
the area where the pump is
operated, then the pump must
be dismantled. The
components must then be
separated into the different
materials and disposed of
separately.
Important:
If changes are made to the pump
delivered to you, your guarantee
is invalidated!
Important:
2. If the delivered media were
poisonous, caustic, etc.
then please be sure to
enclose a copy of the safety
sheet for the media!
Information:
Centrifugal pumps with block
motor are described as drive
variant “
A
”.
Centrigugal pumps with norm-
motor and coupling are
described as drive variant “
B
”.
