OPERATOR'S MANUAL
LuchsNT
Version: 27142-A.1
Subject to technical changes
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
11
3.9
DIAG system diagnosis button
A basic diagnosis is started via button 11 DIAG as follows:
Basic diagnosis: brief push of the button (shorter than 5 s)
The diagnostic mode can be terminated at the end of the diagnosis by pressing the
button again.
3.9.1 Basic
diagnosis
The basic diagnosis includes the following procedure: After the start of the diagnosis,
connected spotlights are searched for. The diagnostic LED 1 flashes during the
spotlights search. After completion of the search, diagnostic LED 1 lights up
permanently, diagnostic LED 2 flashes indicating the number of spotlights found. In
addition, the spotlights are cyclically controlled alternating every 2 s as follows:
white + red + green + blue
white
red
green
blue
