Schlumberger Diver-NETZ, Manual

Page: 21 / 52

February 2014
Page 15
www.swstechnology.com
copyright of SLB
Installation of SIM card
The SIM card is installed in tray of the SIM card holder. See illustration for more details.
Configuration of the Diver-Gate(S)
During the configuration of the Diver-Gate(S) the user will be able to program the following required settings:
• FTP server: Project name, login and password.
• Radio: Number of Diver-DXTs connected to a Diver-Gate(S)
• Network ID: Program network ID in the Diver-Gate(S) to communicate with the Diver-DXTs using the same
network ID
• Wake-up interval: Data transmission rate and time
Other settings like the address of the FTP server, the Universal SIM card settings are already preprogrammed inside
the Diver-Gate(S) based on the SWS server and SWS’s Universal SIM card settings. When the SWS server and/or
the Universal SIM card are not being used, please contact SWS for information on how to configure these settings
in the Diver-Gate(S). Configuring of the Diver-Gate(S) can be done with the Diver-Gate(S) Configuration software.
This software can be downloaded from the swstechnology website (www.swstechnology.com). Appendix VIII
contains more information about configuring the Diver-Gate(S).
Mounting of the Diver-Gate(S)
The Diver-Gate(S) is not waterproof and therefore in most cases will need to be installed in a watertight protection
box (with or without an external power source, such as a battery pack). The type of protection box depends upon
the location, installation method, available space etc. In some cases external antenna’s need to be integrated in the
protection box. The pictures below contain examples of a mounted Diver-Gate(S).