SECT
| V1 | INSTALLATION MANUAL | 202102
7
SCHLETTER SOLAR GMBH | SUBJECT TO CHANGES
2.3. Assembly
Assembly of SECT east-west occurs as follows:
1.
Mark out the array, including any cable trays and walkways.
2.
Fasten the channels to the roof using roof clamps or roof screws.
We’ve stopped offering edge bracket spacers.
3.
Position the first module, then fix the module to the channel using two edge brackets.
4.
Slide the far edge of the first module into the C-sections offered by the edge brackets,
then position two centre brackets and clamp the near edge of the module into place.
5.
Slide the far edge of the second module into the C-sections offered by the centre brackets,
then position two edge brackets and clamp the near edge of the module into place.
6.
Continue to assemble the entire column or row.
SECT east-west
