KC9116/KC9116-2 & KC9326/KC9326-2 INSTALLATION
Installing the KC9116/KC9116-2 or KC9326/KC9326-2
57044-C Page 15 04-2007
22) Apply Template “A”:
23) Drill 3/4” Hole:
24) Place Vertical Rod in Latched Position:
•
Remove paper backing from template “A”.
•
Line up markings on template with the horizontal and backset
markings you made on stile.
•
Press template against door.
•
Mark drill point for 3/4” hole.
NOTE: If existing Von Duprin trim prep is present, proceed to:
Place
Vertical Rod in Latched Position: on page 15
•
Remove template “A.”
•
Drill 3/4” hole.
IMPORTANT: Use care not to damage the device as there are
parts inside door in this area.
NOTE:
If drilling a pilot hole first, do not use a drill smaller
than 1/4”. This will prevent accidental damage to the threads
on the device.
•
If vertical rod’s lift mechanism (
a
) is not visible in hole,
activate the rod trip by closing and latching the door.
a
