7. Attach cable assembly to the interior
assembly PCB by lining up notches on
top of cable connector to slots on PCB
connector. Press connector in firmly until
completely connected.
8. Install interior assembly on inside
mounting plate.
NOTE: The horizontal orientation of the
tailpiece as you insert the inside escutcheon
(thumb turn should be vertical).
PCB connector
6. Secure both assemblies using the screws
provided. Make sure the exterior assembly
is vertically aligned. If you added the cross
bolt, securely tighten the post to the
exterior Ease unit with the additional
screw provided.
5. Position the inside mounting plate to sit flush
on the door, ensuring the cable and tailpiece
go through the holes in the mounting plate.
5
Optional
screw
Cable connector
