Ø70mm
(2-3/4”)
1
2
2. Use a screwdriver to test if deadbolt works
smoothly.
4. Hold the exterior assembly flush to the
door, pull the key tailpiece and cable
through the door hole.
This hole is for
the optional
cross bolt
provided for
stablising your
lock. If you
drilled a hole,
securely tighten
the post before
mounting on
the door.
3. Make sure the bolt is in the retracted
(unlocked) position.
NOTE: The bolt must be in retracted
(unlocked) position before installing
the lockset.
NOTE: Cable must go through door hole
under the bolt.
NOTE: The tailpiece should be kept in a
horizontal position.
Installation
1. Install the bolt on the door ensuring the word
UP is in the upwards position.
4
