Schlage ALLEGION MT20W, User Manual

Page: 4 / 36

4 • Schlage • MT20W Enrollment Reader User Guide
Overview
Overview
The Schlage™ MT20W multi-technology enrollment reader is designed
to simplify the enrollment of smart credentials. The MT20W is powered
by a USB cable (via a computer’s USB port or a powered USB plug)
and utilizes a Wi-Fi connection or USB data share connection, for
certain scenarios (e.g., enrolling no-tour credentials). The MT20W
is compatible with Schlage smart credentials (MIFARE Classic and
MIFARE DESFire EV1), Schlage mobile credentials.
The MT20W supports no-tour (with supported locks) via Schlage
MIFARE Classic or MIFARE DESFire EV1 credentials.
The MT20W will only connect via Wi-Fi to 2.4 GHz routers. It is
not compatible with 5.0 GHz routers. The router must support data
connection speeds of 24Mbps. The router will allow access to portal.
allegionengage.com. The MT20W also supports USB data share via a
desktop app.
MT20W Information
Adding the MT20W to Your ENGAGE Account
In order to use your MT20W enrollment reader with no-tour
functionality, you must first add it to your ENGAGE account. The
following steps will take you through this process.
1 Open up the ENGAGE application and log into your account.
2
Click “Devices” at the bottom of the main screen, then click
the “+” sign at the top. This will add a new device to your
account
3 The ENGAGE app will give instructions and guide you
through the set-up process.
4 The ENGAGE mobile app will now scan for your MT20W
device. Once found, it will list the device along with the
device serial number. Double-check the serial number listed
with the serial number on the label located on the back of