Schiller LITTLE WONDER monster 8495-06-01, Parts And Operator'S Manual

Page: 6 / 27

Use care when loading or unloading the
truckloader onto a trailer or truck.
Drive with caution when making turns and
crossing roads and sidewalks.
Lower the discharge chute before operation.
Do not run the engine in an enclosed area where
dangerous carbon monoxide fumes can collect.
Maintain a safe position, secure footing, and good
balance when operating the equipment.
Maintain a safe distance between two or more
operators when working simultaneously.
Keep clear of the discharge opening at all times
Never direct the discharge toward a bystander.
Stop operation if someone approaches.
Never leave a machine unattended. Always turn
off engine, set throttle to SLOW, key is in OFF
position, and fan has come to a complete stop.
Maintain machine according to manufacturer's
schedule and instructions for maximum safety
and best results.
Do not park machine on a steep grade or slope;
the machine can roll away causing personal injury
or damage to property.
Never look into the hose or discharge chute while
machine is running. Never operate machine
without suction hose attached properly.
4
TRUCKLOADER
SAFETY
OPERATION SAFETY Interrupting
O
peration
- Before leaving the operator's position
for refueling
G eneral
or project end
:
-
a. Move throttle to the SLOW position.
b. Turn the key to the OFF position.
-
c. R
emove the key.
d. Wait until all moving parts, including fans,
-
have come to a complete stop.
-
-
Before leaving the operator's position for clearing
blockages , u nclogging the chute, cleaning ,
-
working on , inspecting, or making repairs:
a. Move throttle to the SLOW position.
-
b. Turn the key to the OFF position
c. Remove the key.
-
d. Wait until all moving parts, including fans,
-
have come to a complete stop.
-
e.Disconnect spark plug wire(s) and/or the
-
battery negative (-) wire before making
any repairs.
- Perform repairs and adjustments where the
-
engine must be kept running in a safe location;
keep hands and feet clear of moving parts.
- Shut off the machine immediately if abnormal
-
vibration occurs.
-
Starting
- Start the equipment according to the instructions
in this manual or posted on the machine.
-
M
ake sure hands and feet are clear of the
discharge
chute
and intake hose prior to starting
the machine
.
- Do not start the machine while standing in front of
the discharge chute
- Do not start the machine until the direction of the
discharge chute has been verified as safe and
not directed at someone.
- Do not change engine governor settings or
overspeed the engine. Operating the engine
at excessive speed can increase the hazard of
personal injury.