3
THANK YOU
Thank you for purchasing a CLASSEN TRS-20E/
TSS-20E.
READ THIS MANUAL
Read this manual carefully in its entirety. It contains
assembly, operating, maintenance, and adjustment
instructions for your TRS-20E/TSS-20E. By
following the operating and maintenance instructions
you will prolong the life of your equipment and
maintain its maximum efficiency. Failure to do so
could result in personal injury or equipment damage.
This manual
should be considered a permanent part of your TRS-
20/TSS-20 and should remain with it if you sell it.
WARRANTY
Refer to last page.
MEASUREMENTS
U.S. Units of measure are used in this manual.
SERIAL NUMBERS
Write frame and engine serial numbers, plus model
numbers in “Owner’s Record” section below. You
may need these numbers when you order parts. The
serial number sticker plate is located near
the left rear corner of the TRS-20E/TSS-20E frame.
ORDERING PARTS
When ordering parts, always give the serial number
and model of your TRS-20E/TSS-20E as well as
the quantity, part number and description of the part
needed.
DIRECTIONS
“Right Hand” and “Left Hand” sides of the
TRS-20E/TSS-20E are determined by facing the
“back” of the unit as you would operate the machine.
INTRODUCTION
