background image

16

6/10

TWO YEAR LIMITED WARRANTY

Effective April 1, 2007

For the period of two years from the date of purchase, CLASSEN MFG., INC. will repair or replace for the original purchaser 
free of charge, any part or parts found upon the examination of our factory authorized service station, or by the factory in Norfolk, 
Nebraska, to be defective in material or workmanship. All transportation charges on parts submitted for repair or replacement under 
this warranty shall be borne by the purchaser.

This warranty does not include engines or engine parts, tires, batteries, or gearboxes that are covered under separate warranties 
furnished by their manufacturer or supplier, nor does it include normal maintenance parts, including but not limited to, spark plugs, 
points, filters, blades, and lubricants.

All service under this warranty will be furnished or performed by our factory authorized service stations.

There is no other expressed warranty. Implied warranties, including those of merchantability and fitness for a particular purpose, are 
limited to two years from the date of purchase and to the extent permitted by law, any and all implied warranties are excluded. The 
above remedy of repair and replacement of defective parts is the purchaser’s exclusive remedy for any defect, malfunction or breach 
of warranty. Liability for incidental or consequential damages under any and all warranties is excluded to the extent permitted  
by law.

NORMAL RESPONSIBILITIES OF THE SELLER AND THE USER

1. 

The Distributor or Dealer is responsible for the proper assembly and preparation of the product for delivery to the end user.

2. 

The User is responsible for reading the Manual and Instructions.

3. 

The User is responsible for proper operation and maintenance as described in the manual.

4. 

The User is responsible for the replacement of wear items such as blades, belts, tires, batteries, etc.

5. 

The User is responsible for damage due to improper operation and maintenance, as well as abuse.

All claims must be received by the factory 30 days after the end of the warranty period to receive warranty consideration.

Schiller Grounds Care, Inc.

1028 Street Road • Southampton, PA 18966

Telephone: 1-800-366-6268

© 2010 Schiller Grounds Care, Inc. All Rights Reserved.

Summary of Contents for Classen TRS-20BE


















Reviews: