1 Connect your speaker to the two top
red terminals only. Right is “+”, and left is
“-”. Please note both of these are active
outputs—do not ground one of them!
3 Connect a balanced source using a
high-quality XLR cable. It’s important that
the preamp is truly balanced for maximum
power output.
4 Get powered up. Connect to a wall
socket with the provided AC cord. Or use
any IEC-type cord; ours isn’t special.
5 Turn on for tunes. Up is on. Down is off.
Pretty simple. Feel free to leave the amp
on all the time if you’d like. You can always
put it in Standby to save power.
MONO
CONNECTION
+
0222V00000 115VAC/750W
1
3
5
2
4