5.1 How to mount tools or adapters in a Weldon arbor?
2) Put the center pilot in the cutter hole.
5) Check if the center pilot can move inside the cutter (up and down).
5.2 Drilling with Core Drills
1 Place the machine at the desired position
4 Fill the arbor with lubrication/cutting oil in the special meant holes. Always
use cutting oil from your dealer.
1) Make sure the machine is disconnected from the power supply.
3) Put the cutter or adapter in the arbor, making sure the flat sides are
exactly in front of the arbor retaining screws.
4) Tighten the retaining screws.
CAUTION :
For 100% magnet clamping force you need at least 10 mm of steel.
Coatings, paintings and dirt between magnet and workpiece will affect clamping
force.
2 Switch on the magnet.
3 Ensure that the magnetic drilling unit is secure on the working piece.
5 Start the motor by pressing the green motor start button (I).
OPERATING MANUAL
3
7
10
SWC 40
Magnetic Drilling Machine
Operating Manual
Summary of Contents for SWC 40
Page 1: ...Magnetic Drilling Machine OPERATING MANUAL SWC 40 SWC 40 ...
Page 15: ...Magnetic Drilling Machine Exploded View SWC 40 Motor complete Antriebseinheit 13 SWC 40 ...
Page 22: ...NOTES Magnetic Drilling Machine Operating Manual SWC 40 SWC 40 ...
Page 23: ...NOTES Magnetic Drilling Machine Operating Manual SWC 40 ...