Schick G2 Concept Operating Instructions Manual Download Page 13

Breite   375 mm
Höhe   160 mm
Tiefe    390 mm

4,5 kg
230 / 115 / 100 V
50/60 Hz
130 W
7.500 min-1

85 x 20 mm

0,3 mm
26,5mm
3A
2

Ø

11. Technische Daten

Abmessungen:

Gewicht:
Nennspannung:
Nennfrequenz:
Aufnahmeleistung:
Drehzahl:
Diamantsägeblatt:
segmentiert
Schnittbreite:
Schnitttiefe:
Laserklasse:
Schutzklasse:

Das Gerät entspricht den geltenden Bestimmungen
nach VDE bezüglich der Gerätesicherheit und des
Funkschutzes.

Diese Gebrauchsanweisung ist stets erreichbar, am
besten in der Nähe des Gerätes, aufzubewahren!

An dieser Stelle möchten wir Sie auch darauf
hinweisen, dass für solche technisch hochwertigen
Geräte ein entsprechender Reparaturservice und
speziell ausgebildetes Fachpersonal erforderlich ist.

Das Haus SCHICK garantiert Ihnen einwandfreie
Reparaturen mit  Original-Ersatzteilen. Auf jede bei
uns im Hause durchgeführte Reparatur wird Ihnen
wieder eine Garantiezeit von 6 Monaten
eingeräumt.

Technische Änderungen vorbehalten

11. Technical Data

Dimensions:

Weight:
Power supply:
Nominal frequency:
Power input:
Speed range:
Diamond saw blade:

Safety class:

segmented

Width of cut:
depth of cut:
Laser class:

Width:  375mm
Height: 160mm
Depth:  390mm

4,5 kg
230 / 115 / 100 V
50/60 Hz
130 W
7.500 min-1

85 x 20 mm

0,3 mm
26,5mm
3A
2

Ø

This unit complies with the current VDE (German
association of electrical technicians) regulations
concerning safety and suppression.

These operating instructions should be readily
accessible and are best kept close to the unit itself.

We would like to take this opportunity to advise you
that a proper repair service and suitable qualified
personnel are required for such highly developed
technical equipment.

SCHICK guarantees to carry out perfect repairs using
original spare parts and we are extending another 6
month guarantee on repairs in our house.

Subject to technical modification without prior notice

11. Caractéristiques techniques

Dimensions:Largeur:

Poids:
Tension nominale:
Fréquence nominale:
Puissance absorbée:
Vitesse de rotation:
Prise pour aspiration:
Diamond saw blade:

:

segmenteé
Largeur de coupe:
Profondeur de coupe:
Catégorie laser:
Catégorie sécurité

Largeur:       375mm
Hauteur:      160mm
Profondeur:  390mm

4,5 kg
230 / 115 / 100 V
50/60 Hz
130 W
7.500 min-1
Ø 38 mm

85 x 20 mm

0,3 mm
26,5mm
3A
2

Ø

L’appareil est conforme aux éxigences de la VDE
(association électronique allemande) en ce qui concerne
la ségurité des appareils et la protection radiotélegraphique.

Ce mode d'emploi est conservé à portée de main, de
préférence à proximité de l'appareil!

A ce propos, nous vous informons, que pour de tels appareils
de haute technicité, un service de réparation compétent et un
personnel hautement qualifié sont necessaires.

La maison SCHICK vous garantit des réparations parfaites
avec des pièces de rechange d'origine et nous étendons encore
garantie de 6 mois sur des réparations dans notre maison.

Sous réserve de modifications techniques

13

Summary of Contents for G2 Concept



















Reviews: