WARNINGS
PRECAUTIONS
WARNINGS
Read carefully this manual and follow these
precautions before operating the device
Keep this manual for possible future needs
Pay attention not to pour liquids onto the device and do not operate in conditions of excessive humidity
Do not install the device close to sources of excessive heat, do not expose it to direct solar radiation and do not
position it without protection in a dusty environment
Be sure that the main voltage does not exceed the value indicated on the back panel
Do not use the device if the main cable or the plug aren’t in a perfect condition (if necessary, replace it)
If the main cable has to be replaced, the operation must be carried out by qualified personnel. Replace the cable
exclusively with one that is an exact substitute
In order to avoid interference, do not install the device close to power transformers, TV sets, RF transmitters, electric
motors or any source of electric energy
Do not point microphones against speakers: this could generate annoying whistles (Larsen effect) that cause damage
In order to avoid unpleasant and costly inconveniences, use only original connecting cables
To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC socket
When cleaning, do not use solvents (e.g. acetone or alcohol). These could damage the external finishing and the
serigraphy
Do not attempt to service this product. In case of malfunction of any part of the system call the nearest technical
assistance centre or a specialized technical centre
For good ventilation, the heat sink should never be covered or obstructed by blankets, sofas or similar furniture. Be
sure also to leave sufficient clearance between the heat sink and any other surface
No source of flames, e.g. candles, should be placed on or near the device
The device should not be exposed to water, even in small amounts. No object containing liquids should be placed on
or near the device
The device should only be connected to a mains socket outlet equipped with protection ground system
When the device is installed, be sure the mains socket and the plug of the mains cable are easily accessible
