www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
13. Troubleshooting
Warning: In the interests of operational safety, always switch off the saw and remove the mains plug before
carrying out maintenance work.
Fault
Possible causes
Action
Saw blades break
Tension incorrectly set
Set the correct tension
Load to great
Feed the workpiece more slowly
Incorrect saw blade variety
Use the correct saw blades
Workpiece not fed straight
Avoid exerting pressure from the side
Motor does not function
Mains Gable faulty
Change faulty parts
Motor faulty
Call customer service. Do not attempt
to repair the motor yourself as this
should be carried out by trained
personnel.
Vibration
NOTE: The saw vibrates slightly
when the motor is running in normal
operation.
Saw incorrectely installed
Refer to the instructions given earlier in
this manual for information on installing
the saw
Unsuitable underlay
The heavier the work bench is,the
less the vibration. A bench made from
ply wood always vibrates more than
one made from solid wood. Select the
work bench best suited to your working
conditions
The work bench is not screwed down
or is on the motor
Tighten the locking lever
The motor is not secured
Securely screw the motor in place
Saw blade swings out
Holders not aligned straight
Holders not aligned
Losen the screws with which the
holders are fastenedto the arm.
Align the holders so that they are
perpendicular to each other and
retighten the screws.
23 / 48
FR
IT
DE
GB
