english 21
Trouble shooting
Problem
Possible cause
Solutions
The motor doesn’t start.
a) The upper housing unit is not
properly closed.
a) Screw in the safety thoroughly
b) The extension cable is defective. b) Exchange the extension cable or
repair it.
c) No current is coming out of the
outlet.
c) Check the mains fuse.
d) The switch is defective.
d) Fig. D
e) The motor is defective, the
capacitor is defective
e) Fig. D
f) Shredder material is obstructing
the blade disc.
f) Pull the main plug, open the
housing and clean it out.
The motor doesn’t do anything, the
safety default switches on.
a) The extension cable has an
insufficient cross section
a) Choose an extension cable with
a larger cross section
b) The cable between the power
system connection and the
shredder is too long.
b) Create the shortest possible
way between the power system
connection and the shredder.
The motor is overloaded the safety
default switches on.
a) The quantity of wet shredded
material is too high.
a) Select a smaller quantity of
shredded material. Now and
then, include dry shredding
material
b) The blade and output areas are
clogged.
b) Pull the main fuse, open the
housing and clean it out.
c) The blade is dull.
c) Resharpen or change
d) The cable between the power
system connection and the
shredder is too long.
d) Choose an extension cable with
a larger cross section.
The shredder intake is diminished,
reduced cutting capacity.
a) The blade is either dull or worn
out.
a) Turn blade, sharpen blade or
replace entirely.
Excessive vibrations/noise
a) Blade nut/bolt loose
a) Tighten blade nut/bolt
b) Cutting blade damaged
b) Replace blade
c) Machine damaged internally
c) Contact Service Agent
